Posted by snowhunter on July 7, 2013 at 10:50 AM
|
|


Bobby Allen and I did the wiring and soldered all the contacts to the rails Sat afternoon. Each rail contact goes to a mini connector block on the edge of the table where each will be connected to the master harness which, in turn, will be connected to the control module which I built Friday. I Didn't have enough wire to build the harness, so I drew up a measured track plan with the contacts and gaps scaled in so I can build the harness later this month. As Bobby will attest, it was a lot more work than we expected. Damn well better work or I'm, really going to be upset with the guy that suggested this.!!!! Ted
Oops!
Oops, you forgot something.